D.20.61 - Steam Distribution

The following models are available:

D.20.61.011a | Steam Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC A or B, PIPING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC A or B (no seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.011b | Steam Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC A or B, BRACING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC A or B (no seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.012a | Steam Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC C, PIPING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC C (low seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.012b | Steam Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC C, BRACING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC C (low seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.013a | Steam Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F, PIPING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.013b | Steam Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F, BRACING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Normal
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.014a | Steam Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F (OSHPD or sim), PIPING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Special Regulations (e.g. OSHPD) for Piping Installations
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.014b | Steam Piping - Small Diameter Threaded Steel - (2.5 inches in diameter or less), SDC D, E, or F (OSHPD or sim), BRACING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe 2.5 inches in diameter or less
Construction Quality: Special Regulations (e.g. OSHPD) for Piping Installations
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.021a | Steam Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC A or B, PIPING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe greater than 2.5 inches in diameter
Construction Quality: Normal
Seismic Installation Conditions: SDC A or B (no seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.022a | Steam Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC C, PIPING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe greater than 2.5 inches in diameter
Construction Quality: Normal
Seismic Installation Conditions: SDC C (low seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.023a | Steam Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F, PIPING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe greater than 2.5 inches in diameter
Construction Quality: Normal
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.023b | Steam Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F, BRACING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe greater than 2.5 inches in diameter
Construction Quality: Normal
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.024a | Steam Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F (OSHPD or sim), PIPING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe greater than 2.5 inches in diameter
Construction Quality: Special Regulation (e.g. OSHPD) for Piping Installations
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time


D.20.61.024b | Steam Piping - Large Diameter Welded Steel - (greater than 2.5 inches in diameter), SDC D, E, or F (OSHPD or sim), BRACING FRAGILITY

Costing based upon 1000 ft segments of pipe, pipe greater than 2.5 inches in diameter
Construction Quality: Special Regulation (e.g. OSHPD) for Piping Installations
Seismic Installation Conditions: SDC D, E, F (high seismic design)
Notes: Consequence is for piping only. Enter floor wetting consequence seperately. Cost includes allowance for MEP relocation to perform work.

Suggested Block Size: 1000 LF

The following repair consequences are available for this model:

Carbon

Cost

Energy

Time